|
There is more to I/O than just digital and analog
The SATELLINK C-Link transmits and receives pulses in addition to
digital inputs and outputs for scales, positioning, counting and
other applications that use pulse signal data.
Each C-Link comes with
slow pulse input and output, and fast pulse input and output,
4 digital inputs, and 4 digital outputs.
Modbus RTU Addressable Remote I/O
With DIP switch configurable Modbus addressing the I-Link 100 becomes a remote I/O drop capable of directly interfacing with Modbus RTU controllers and HMI platforms.
Expandable for More I/O
The I-Link 100 features 4 Digital and 2 Analog Inputs and also 4 Digital and 2 Analog Outputs. Expansion modules allow for up to 22 digital and 2 analog inputs or 8 analog and 16 digital inputs with an equal number of outputs.
Additional Levels of Reliability
Adding a Confirmation of Reception (CR) protocol and also monitoring the connection status, the I-Link 100 confirms each message sent and retransmits any lost data. If the connection is lost or there is an I/O failure an alarm output can trigger visible or audible notification.
Point to Point or Multipoint
C-Link is capable of point-to-point digital connection without configuration, and dip-switch addressable for point-to-multipoint connections in larger networks. Multipoint networks can utilize the built-in fast pulse input for metering, positioning, counters and other pulse output device applications.
Visual Status Indicators
Bright LED indicator lights provide visual status of all active inputs and outputs and any alarm states.
|
